Project Working

A Dedicated Sharpening Bench part 1

An Introduction...

"The best hand tools in the world are worthless in the hands of the woodworker who cannot sharpen them."

After reading and experimenting with, practicing and then studying the different techniques of sharpening Ive come to settle on a system that is working for me in my current shop space and thats good! A freshly sharpened hand tool can turn the most challenging joinery tasks into wonderful and relaxed procedures. Your work will be cleaner with tighter fitting joinery and your tools will perform as they were intended to the day they were made. The joys of working wood will be that much the greater.
In my own basement work space here in Toronto, Ive followed the line and Im happy with my results; but something Im not happy with and have been promising myself for months to address is my sharpening location and current set-up.
One day last year, I noticed a neighbour throwing out a small wooden table. I snatched it up, rescuing it from the eternal wasteland of the land fill site and have been using it as my sharpening table ever since. Prior to the table I was using a sharpening hook system I designed awhile ago. It was basically an over-sized bench hook with some cleats to hold water stones and a side area for stone storage. The sharpening hook worked when my bench top wasnt cluttered, (which if you know me you know that it hasnt happened much this past year!) so the routine of moving my work project or tools to make room for the sharpening hook soon became tiresome. The small throw away tables footprint has also become reminiscent of a drunken sailor on shore leave so Ive finally decided, with a little help from Fine Woodworking.com, to build a new bench dedicated to sharpening.
A small scale workbench with large scale workbench strength. The frame has mortise and tenon joinery with a solid 1" thick work surface that has bread board ends fitted into a heavy, through dovetailed apron.
It has a tool tray featuring a unique and convenient way of actually holding tools ! (not just for the hamsters anymore) and Ive added some off the shelf items that will also add to the -dare I say- pleasure of sharpening?

Do you currently have a dedicated sharpening area? Is it a re-used piece of furniture or maybe a purpose made table or bench? Id love to hear about it- be part of the discussion and share some thoughts.

















In the next post Ill assemble my cut list and get right into the project with some stock preparation and Ill glue-up the top panels...stay tuned.